OOB Review of Combat Armour Models 35A017 1/35 Bedford Truck
Brief Summary:
Moderate difficulty, many parts; compact and delicate, but with minor flaws and fragmented parts.
This Bedford truck from Combat Armour Models (CAMs Model) is a typical representative of British trucks. Today let's take a look at how this new release looks in out-of-box build condition.
This Bedford truck is a finely detailed full-interior product.
Next we'll show the axle section — very simple, just follow the instructions.
Then engine installation of Combat Armour Models Bedford Truck.
This is the most exquisite 1/35 scale vehicle engine I have ever built. Its detail is extremely rich — it even has the spark plug wiring harness controller molded out. If the builder can find suitable reference materials, the wiring can be easily connected to the spark plug controller to create an even more exquisite engine. At the same time, this engine can also have additional wiring added to make it even more realistic.
Also, the front water-cooling radiator is assembled directly together with the engine. Note the operation — there was originally a long strip-shaped photo-etch structural part that was very difficult to install, and the attempt failed, but fortunately it does not affect later installation. Be careful and pay attention here. Do as many test-fits as possible, then use instant glue to bond it, and during the bonding process also continue to adjust.
Next, we install the exhaust pipe, front and rear wheel assemblies, and part of the cab section.
The front and rear wheel assembly structures and exhaust pipe are not difficult to install — just follow the instructions for normal installation. Pay attention to adjusting the positions of the front and rear wheel assemblies and the middle driveshaft to prevent problems with installation or failure to connect. Be sure to do multiple test-fits to ensure the correct positions of all parts, and only apply glue after confirming.
First install the cab floor panel and secure its position before installing the various small parts — otherwise parts will not match up. While installing the cab, the fairly precise steering structure is also installed. This vehicle's steering structure has some very small parts — pay close attention to their installation positions and connection methods. You need to fully understand the instructions before installing these connection parts, and do multiple test-fits before applying glue. Attached here is the manufacturer's 3D diagram for reference so builders can achieve the correct installation state.
Installing the Front Cab Section:
After completing the cab's miscellaneous parts, control levers, and connecting lines, we begin installing the front cab. Note that when installing the front cab, the clear parts need to be connected with the photo-etch parts first, then installed. So be sure to confirm the positions of the photo-etch and clear parts.
Four Wheels On:
Next, let's complete the rear dump bed section.
With Official Accessories:
The 3D-printed parts are from the brand, with excellent detail. I hope the brand will continue to improve and release even better model products in the future.
Summary of Combat Armour Models 35A017 1/35 Bedford Truck:
Pros: The overall difficulty of this Bedford truck from Combat Armour Models is not too high. Although the number of parts is relatively large, it is not overly tedious. It can fully express the details of this truck in all aspects.
Cons: Combat Armour Models 35A017 is a very delicate and compact truck, but there are still some minor flaws. It shows many good ideas from the designer, but at the same time many parts are designed to be too fragmented, which brings some trouble to the builder's experience. For example, a very long and complex structural part under the engine bay — the developers used photo-etch to express their idea, but this is not a very good solution. It is very difficult to build, and furthermore, when this part is installed on the vehicle body, you actually cannot see much effect.
Recommendation Rating (out of 5 stars): ★★★★
Next issue, let's take a look at the OOB Review of Trumpeter 05573 1/35 JS-4 Tank Model
The above content is translated from the WeChat Official Account of moxingfans - Static Model Enthusiast, moxingfans.com – Scale Model Fans, a veteran vertical website for static military scale models launched in late 2014, with nearly 12 years of operation. It mainly focuses on armoured fighting vehicle subjects.