{"title":"BELKITS","description":"\u003cp\u003eBELKITS Model Kits\u003c\/p\u003e","products":[{"product_id":"belkits-bel013-1-24-fiesta-rs-wrc-2017-tour-de-corse-ott-tanak-martin-jarveoja","title":"BELKITS BEL013 1\/24 Fiesta RS WRC 2017 Tour de Corse (Ott Tanak\/Martin Jarveoja)","description":"\u003cp\u003e[About the actual vehicle]\u003cbr\u003e- The Fiesta RS WRC is a rally machine developed by , which has been active in rallies around the world for many years, in accordance with new regulations in 2017.\u003cbr\u003e- Developed as a successor model to the Fiesta RS WRC, which was active from 2011 to 2016, it debuted with a win at the Monte Carlo Rally, the opening round of the 2017 WRC.\u003cbr\u003e- In the 2017 season, he won the drivers' title and manufacturer's title with five wins.\u003cbr\u003e- The machine was developed based on the 2017 Fiesta.\u003cbr\u003e- The engine is equipped with a 1600cc inline 4-cylinder turbo.\u003cbr\u003e- The transmission is equipped with an M Sports\/Ricardo hydraulic sequential transmission, and the four-wheel drive is equipped with front and rear mechanical differential gears and an active center differential.\u003cbr\u003e- The suspension used MacPherson struts both front and rear.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e- This is a 1\/24 scale Fiesta RS WRC plastic model assembly kit released by Belkit, a Belgian model manufacturer passionate about rally car model development.\u003cbr\u003e- The number of parts is 133, the finished total length is 167mm, and the total width is 77mm.\u003cbr\u003e- This is a model of the number 2 machine driven by Ott Tänak in the 2017 WRC Round 4 Tour de Corse.\u003cbr\u003e- The body, which accurately reproduces the shape of the fender with some separate parts, is realistically reproduced from the design to the smallest details.\u003cbr\u003e- Markings include special color schemes and various sponsor marks using large decals.\u003cbr\u003e- Also, the aero parts such as fins that can be attached to the body are made of metal parts and have a sharp finish.\u003cbr\u003e- The underside of the chassis is mechanically reproduced, including the suspension and 4WD drive shaft.\u003cbr\u003e- In addition, the cockpit is modeled with detailed rally equipment.\u003cbr\u003e- Also, don't miss the reproduction of Bell Kit's unique features such as the roll bar.\u003cbr\u003e- The kit includes seat belt material, photo-etched parts for detail improvement, and a silver sticker that reproduces the thermal protection that can be attached to the window.\u003cbr\u003e- This is a kit with a wide range of contents.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Reproduce Fiesta RS WRC on 1\/24 scale\u003cbr\u003e- Modeled after 2017 Tour de Corse specifications\u003cbr\u003e- Etched parts included for detail improvement\u003cbr\u003e- Realistic cockpit\u003cbr\u003e- The underside of the chassis is mechanically reproduced, including the suspension.\u003cbr\u003e- Markings are expressed as decals\u003cbr\u003e- Also includes auxiliary light parts for night stage\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e( This is a machine translation. Please allow for possible misinterpretations in the text. )\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e¡ù Trademarks and Trade Dress used under license to Premium-Collectibles\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eItem Size\/Weight : 36 x 21 x 9 cm \/ 525g\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853426942,"sku":"BEL013 BELKITS","price":79.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/e1b9df8295394ece.jpg?v=1772689361"},{"product_id":"belkits-beltk002-1-24-fabia-s2000-evo-gravel-specs-conversion-kit-for-bel004","title":"BELKITS BELTK002 1\/24 Fabia S2000 EVO Gravel Specs Conversion Kit (for BEL004)","description":"\u003cp\u003eItem Size\/Weight : 20.3 x 18.8 x 2.5 cm \/ 103g \u003cbr\u003eParts set for modifying the 1\/24 scale Skoda Fabia S2000EVO kit (BEL004) released by Belkit.\u003cbr\u003e- This set includes parts for changing to gravel rally specifications.\u003cbr\u003e- By replacing the suspension parts of the kit body with the parts of this set, it is possible to finish the model with the setting for the gravel rally where the vehicle height is raised.\u003cbr\u003e- The set includes plastic parts as well as tires and wheels for gravel.\u003cbr\u003e- Assembly is explained in the kit body instructions.\u003cbr\u003e- If you are going to assemble with gravel rally specifications, please purchase it together.\u003cbr\u003e\u003cbr\u003e( This is a machine translation. Please allow for possible misinterpretations in the text. )\u003cbr\u003e\u003cbr\u003eCopyright and reproduction rights to the trademark, samples and models granted by SKODA AUTO a.s\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853459710,"sku":"BELTK002 BELKITS","price":23.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/237e6b9276f8c162.jpg?v=1772689362"},{"product_id":"belkits-beltk001-1-24-specs-conversion-kit-for-fiesta-s200-wrc-for-bel002-003","title":"BELKITS BELTK001 1\/24 Specs Conversion Kit for Fiesta S200\/WRC (for BEL002\/003)","description":"\u003cp\u003e- Build your Fiesta gravel spec\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e- Parts set for modifying the 1\/24 scale Fiesta kit (BEL002\/003) released by Belkit.\u003cbr\u003e- This set includes parts for changing to gravel rally specifications.\u003cbr\u003e- By replacing the suspension parts of the kit body with the parts of this set, it is possible to finish the model with the setting for the gravel rally where the vehicle height is raised.\u003cbr\u003e- The set includes plastic parts as well as tires\/wheels for gravel.\u003cbr\u003e- Assembly is explained in the kit body instructions.\u003cbr\u003e- If you are going to assemble with gravel rally specifications, please purchase it together.\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e- Fiesta is the machine that , who has been active in world rallies for many years, debuted in the 2010 Monte Carlo Rally.\u003cbr\u003e- Developed in collaboration with and M-Sport.\u003cbr\u003e- Equipped with an in-line 4-cylinder 1998cc engine.\u003cbr\u003e- Suspension is front and rear MacPherson struts and drive is 4WD.\u003cbr\u003e- In 2010, he continued his success with his debut win at the Monte Carlo Rally.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/02\/09\/6c8rfq2xc3c3464e\/b83bae036f790ff2.jpg\"\u003e\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853492478,"sku":"BELTK001 BELKITS","price":23.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/1c70da8a3fce78a0.jpg?v=1772689364"},{"product_id":"belkits-bel021-1-24-i20-coupe-wrc-2020-monte-carlo-rally-winner-model-car","title":"BELKITS BEL021 1\/24 i20 Coupe WRC 2020 Monte Carlo Rally Winner (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36 x 21 x 9 cm \/ 678g \u003cbr\u003e[About actual car]\u003cbr\u003e- The i20 Coupe WRC is a WRC machine developed by , a Korean car manufacturer.\u003cbr\u003e- Developed based on 's subcompact car, the second-generation i20 3-door coupe.\u003cbr\u003e- Debuted in WRC in 2017. The machine is based in Germany and developed by Motorsports GmbH, which is in charge of 's global motorsports activities such as WRC and customer racing.\u003cbr\u003e- Equipped with a 1.6-liter in-line 4-cylinder direct-injection turbo engine that produces 380 horsepower, and combines front and rear MacPherson strut suspension with a four-wheel drive system.\u003cbr\u003e- Started participating in WRC from 2017. Continuing to improve, in 2020, he recorded three wins, including the opening round of the Monte Carlo Rally, and won the WRC constructor championship for the second consecutive year following 2019.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e-A 1\/24 scale i20 Coupe WRC plastic model assembly kit released by Belkit, a Belgian model maker that vigorously develops rally car models.\u003cbr\u003e-The total length of the finished product is about 170mm, and the powerful WRC works machine style is realistically modeled with a completely new mold.\u003cbr\u003e- Although it is an engineless kit, you can see the details of the champion machine while assembling, such as the mechanical reproduction of the chassis underside, suspension, etc., and especially the reproduction of the cockpit surrounded by the roll bar.\u003cbr\u003e-The body has a separate part for the overfender. It reproduces the expression sharply and three-dimensionally.\u003cbr\u003e- In addition, soft plastic material is used to reproduce the texture of the parts.\u003cbr\u003e- In addition, the kit also includes a set of photo-etched parts for improving details such as brake discs.\u003cbr\u003e- It is a complete kit.\u003cbr\u003e-This kit reproduces the markings of the machine driven by Thierry Neuville and winning the 2020 WRC opening round, the Monte Carlo Rally.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- 1\/24 scale reproduction of the 2020 i20 Coupe WRC with a completely new mold\u003cbr\u003e- Modeled after the 2020 Monte Carlo Rally winner\u003cbr\u003e- Etching parts for detail improvement included\u003cbr\u003e- Realistic cockpit\u003cbr\u003e- The underside of the chassis is also mechanically reproduced, such as the suspension.\u003cbr\u003e- Markings are expressed with large decals\u003cbr\u003e- Comes with a Japanese supplementary manual for easy assembly\u003cbr\u003e* This product will be delivered via Platts Co., Ltd.\u003cbr\u003e* Platts Co., Ltd. accepts after-sales service only for officially imported products purchased through our distribution. Please note that we do not accept parallel imports.\u003cbr\u003e*The image is under development. It may differ from the actual product.\u003cbr\u003e*Please note that prices, specifications, and release dates are subject to change without notice.\u003cbr\u003e\u003cbr\u003e( This is a machine translation. Please allow for possible misinterpretations in the text. )\u003cbr\u003e\u003cbr\u003e`Licensed by Motorsport GmbH` ` and all other marks, emblems and designs are intellectual property rights of Motor Company or licensed to it by its partners`\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853525246,"sku":"BEL021 BELKITS","price":90.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/a26eec3d0173cf90.jpg?v=1772689364"},{"product_id":"belkits-bel020-1-24ascona-400-rally-monte-carlo-1982-model-car","title":"BELKITS BEL020 1\/24Ascona 400 Rally Monte Carlo 1982 (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36.2 x 21 x 9.1 cm \/ 470g \u003cbr\u003eHighly detailed interior reproduction\u003cbr\u003e- Markings are high quality Cartograf decals\u003cbr\u003e- Etching parts for detailing are also included.\u003cbr\u003e- Completely new mold\u003cbr\u003e\u003cbr\u003e- This is a 1\/24 scale plastic model assembly kit of the Ascona 400 Gr.4, which was active in rallies from 1980 to 1983.\u003cbr\u003e- The body is a one-piece reproduction of the style equipped with wide over fenders, rear spoiler, front skirt, etc. unique to Group 4 machines.\u003cbr\u003e- The cockpit is accurately modeled using separate parts, including the rally-equipped meters on the dashboard and the footrest on the floor.\u003cbr\u003e- The suspension and other mechanisms on the underside of the chassis are also reproduced in detail, conveying the Spartan driving style of a rally car.\u003cbr\u003e- The markings reproduce the car number 2, Walter Rohrl's car, which won the Monte Carlo Rally, held from January 16th to 22nd, 1982, as the opening round of the 1982 WRC.\u003cbr\u003e- In addition to basic plastic parts, the set also includes photo-etched detail parts, seat belt material, and a masking sheet that is convenient for painting the window frames.\u003cbr\u003e\u003cbr\u003e- 1\/24 scale reproduction of the 1982 Ascona 400\u003cbr\u003e- Includes etching parts for detailing and seat belts\u003cbr\u003e- High quality decals made by Italian Cartograf\u003cbr\u003e- Finished length 180mm, overall width 69mm\u003cbr\u003e- Japanese supplementary instructions included\u003cbr\u003e\u003cbr\u003e*The image is of a product under development and may differ from the actual product.\u003cbr\u003e*Please note that prices, specifications, release dates, etc. may be changed without notice.\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853558014,"sku":"BEL020 BELKITS","price":77.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/ef8c8bdaf0bedd2b.jpg?v=1772689364"},{"product_id":"belkits-bel019-1-24-ascona-400-rally-monte-carlo-1981-model-car","title":"BELKITS BEL019 1\/24 Ascona 400 Rally Monte Carlo 1981 (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36.2 x 21 x 9 cm \/ 470g \u003cbr\u003eHighly detailed interior reproduction\u003cbr\u003e- Markings are high quality Cartograf decals\u003cbr\u003e- Etching parts for detailing are also included.\u003cbr\u003e- Completely new mold\u003cbr\u003e\u003cbr\u003e- This is a 1\/24 scale plastic model assembly kit of the Ascona 400 Gr.4, which was active in rallies from 1980 to 1983.\u003cbr\u003e- The body is a one-piece reproduction of the style equipped with wide over fenders, rear spoiler, front skirt, etc. unique to Group 4 machines.\u003cbr\u003e- The cockpit is accurately modeled using separate parts, including the rally-equipped meters on the dashboard and the footrest on the floor.\u003cbr\u003e- The suspension and other mechanisms on the underside of the chassis are also reproduced in detail, conveying the Spartan driving style of a rally car.\u003cbr\u003e- The marking reproduces the car driven by Joch Kleindt, who finished third in the Monte Carlo Rally, held from January 24th to 30th, 1982 as the opening round of the 1981 WRC.\u003cbr\u003e- In addition to basic plastic parts, the set also includes photo-etched detail parts, seat belt material, and a masking sheet that is convenient for painting the window frames.\u003cbr\u003e\u003cbr\u003e- 1\/24 scale reproduction of the 1981 Ascona 400\u003cbr\u003e- Includes etching parts for detailing and seat belts\u003cbr\u003e- High quality decals made by Italian Cartograf\u003cbr\u003e- Finished length 180mm, overall width 69mm\u003cbr\u003e- Japanese supplementary instructions included\u003cbr\u003e\u003cbr\u003e*The image is of a product under development and may differ from the actual product.\u003cbr\u003e*Please note that prices, specifications, release dates, etc. may be changed without notice.\u003cbr\u003e\u003cbr\u003e( This is a machine translation. Please allow for possible misinterpretations in the text. )\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853590782,"sku":"BEL019 BELKITS","price":77.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/0222985742098d18.jpg?v=1772689365"},{"product_id":"belkits-bel018-1-24-c3-wrc-rally-finland-2017-gravel-model-car","title":"BELKITS BEL018 1\/24 C3 WRC Rally Finland 2017 (Gravel) (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36 x 21 x 9 cm \/ 533g \u003cbr\u003eFull-featured bell kit with photo-etched parts (Japanese supplementary manual included)\u003cbr\u003e- A 1\/24 scale plastic model assembly kit that reproduces the C3 WRC that finished 5th in the 2017 WRC Finland Rally.\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e- With the Xsara WRC, Citroën, which recorded 28 WRC wins in the six years from 2001 to 2006, will make a comeback in 2017 after taking a break from WRC activities after the 2015 season.\u003cbr\u003e- The machine at that time was the C3 WRC.\u003cbr\u003e- It was developed based on the 5-door model of the commercially available small car C3 according to the regulations of World Rally Car and WR Car.\u003cbr\u003e- A 1.6-liter in-line 4-cylinder engine is placed horizontally at the front.\u003cbr\u003e- The front and rear suspension used MacPherson strut 4-wheel independent, and the drive system adopted 4-wheel drive.\u003cbr\u003e- Debuted in 2017. Driven by Kris Meeke, Sebastien Loeb and Sebastien Ogier.\u003cbr\u003e- 2 wins in 2017, 1 win in 2018 and 3 wins in 2019.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e-A 1\/24 scale C3 WRC plastic model assembly kit released by Belkit, a Belgian model maker that vigorously develops rally car models.\u003cbr\u003e- Supplementary instructions in Japanese are included for easy assembly.\u003cbr\u003e-The total length of the finished product is about 170mm, and the powerful style such as the front and rear fenders with overhanging overfenders of the powerful world rally car specifications and the large rear wing are realistically modeled.\u003cbr\u003e-In addition, the underside of the chassis, the cockpit surrounded by the suspension and roll bar are also finished with a sense of density.\u003cbr\u003e- Suspension and tires reproduce gravel specifications unique to Finnish rally specifications.\u003cbr\u003e-The kit also includes photo-etched parts for improving details such as brake discs, metal stamping parts that reproduce the fins on the front of the body, and metal pin parts that support the mounting of auxiliary lights for the night stage.\u003cbr\u003e- In addition, it is a complete kit with mask stickers, carbon decals and seat belts that are great for painting window frames.\u003cbr\u003e-This kit reproduces the markings of the machine driven by Breen Craig, who finished 5th in the 2017 WRC Round 9, Finland Rally.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Completely new design\u003cbr\u003e- 1\/24 scale reproduction of the 2017 C3 WRC with a completely new mold\u003cbr\u003e- Based on the car driven by Breen Craig at Rally Finland 2017\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e- Etching parts for detail improvement and metal parts included\u003cbr\u003e- Comes with a mask sheet for window frame painting\u003cbr\u003e- Markings are represented by large decals. Cartograf carbon decals are also included.\u003cbr\u003e- Includes gravel parts\u003cbr\u003e* This product will be delivered via Platts Co., Ltd.\u003cbr\u003e* Platts Co., Ltd. accepts after-sales service only for officially imported products purchased through our distribution. Please note that we do not accept parallel imports.\u003cbr\u003e*The image is under development. It may differ from the actual product.\u003cbr\u003e*Please note that prices, specifications, and release dates are subject to change without notice.\u003cbr\u003e\u003cbr\u003e( This is a machine translation. Please allow for possible misinterpretations in the text. )\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853623550,"sku":"BEL018 BELKITS","price":68.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/734edb8b2bd77a66.jpg?v=1772689366"},{"product_id":"belkits-bel016-1-24-metro-6r4-1986-rac-rally-model-car","title":"BELKITS BEL016 1\/24 Metro 6R4 1986 RAC Rally (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36 x 21 x 9 cm \/ 483g \u003cbr\u003eEnjoy the powerful metro created by Group B's enthusiasm in full detail\u003cbr\u003e\u003cbr\u003e[About the actual vehicle]\u003cbr\u003e- The MG Metro 6R4 was developed and introduced by British Leyland in the World Rally Championship WRC, which was fully implemented in 1983 and was contested by Group B machines.\u003cbr\u003e- Produced based on the Rover Metro, a small car that appeared in 1980.\u003cbr\u003e- Patrick Head, technical director of F-1's main team, Williams Grand Prix Engineering, is said to have been involved in its development.\u003cbr\u003e- Based on Metro's monocoque, the rear half of the car is equipped with a newly built steel tube frame, and a V-type 8-cylinder engine is mounted midship.\u003cbr\u003e- The engine is a 2991cc naturally aspirated aluminum 90-degree V-6 cylinder.\u003cbr\u003e- The drive system used full-time 4WD.\u003cbr\u003e- Debuted in the final race of the 1985 season and participated in the 1986 World Rally Championship.\u003cbr\u003e- After that, he moved the stage to Pikes Peak Hill Climb and became active.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e- This is a 1\/24 scale plastic model assembly kit that reproduces the MG Metro 6R4, which was active in rally from 1985 to 1986.\u003cbr\u003e- The kit is fully detailed, including the engine.\u003cbr\u003e- The enthusiastic mechanism of Group B machines is precisely modeled, not only the body but also the engine mounted in the midship.\u003cbr\u003e- The body has an impressive style that is unique to Group B machines, such as the wide over fenders, front wing, and rear spoiler.\u003cbr\u003e- The engine mounted at the rear of the chassis is a V-type 6-cylinder engine that reproduces not only the main body but also the transmission and 4WD mechanism that can be distributed between the front and rear.\u003cbr\u003e- The cockpit is modeled with separate parts such as rally equipment installed on the dashboard, footrests on the floor, and tools such as fire extinguishers and wrenches.\u003cbr\u003e- The markings reproduce the car number 15, Jimmy McRae's machine, which participated in the RAC Rally held in England in November 1986.\u003cbr\u003e- In addition to the basic plastic parts, the set also includes photo-etched detail-up parts, seatbelt material, and a masking sheet that is useful for painting window frames.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Reproduce the 1986 MG Metro 6R4 in 1\/24 scale\u003cbr\u003e- Also includes photo-etched parts and seatbelts for detail improvement\u003cbr\u003e- High quality decals made by Cartograf in Italy\u003cbr\u003e- Finished total length: 167mm, total width: 77mm, number of parts: 133\u003cbr\u003e- Full detail kit that reproduces the engine\u003cbr\u003e- Japanese supplementary manual included\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853656318,"sku":"BEL016 BELKITS","price":77.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/2b8ee6460fef8db9.jpg?v=1772689367"},{"product_id":"belkits-bel015-1-24-metro-6r4-monte-carlo-rally-1986-model-car","title":"BELKITS BEL015 1\/24 Metro 6R4 Monte Carlo Rally 1986 (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36.2 x 21.1 x 9.2 cm \/ 481g \u003cbr\u003eThis is a 1\/24 scale plastic model assembly kit that reproduces the Metro 6R4 that was active in the rally from 1985 to 1986.\u003cbr\u003e- The kit is full detail that reproduces even the engine.\u003cbr\u003e-The enthusiastic mechanism of the Group B machine is precisely modeled not only on the body but also on the engine mounted on the midship.\u003cbr\u003e- The body has a wide over fender, front wing and rear spoiler unique to Group B machines, giving it a powerful style.\u003cbr\u003e-The engine mounted at the rear of the chassis reproduces the V6 cylinder body as well as the 4WD mechanism that can be distributed from the transmission to the front and rear.\u003cbr\u003e-In the cockpit, rally equipment on the dashboard, footrests on the floor, tools such as fire extinguishers and wrenches are modeled with separate parts.\u003cbr\u003e- The marking reproduces the car number 11, Malcolm Wilson's machine that participated in the 1986 WRC opening round, Monte Carlo Rally.\u003cbr\u003e- In addition to the basic plastic parts, the set includes etching detail up parts, seat belt materials, and masking sheets that are convenient for painting window frames.\u003cbr\u003e\u003cbr\u003e- 1\/24 scale reproduction of the 1986 Metro 6R4\u003cbr\u003e-Etching parts for detail improvement and seat belts are also included.\u003cbr\u003e- Decals are made by high quality Italian Cartograf\u003cbr\u003e- Finished length 167mm, width 77mm, 133 parts\u003cbr\u003e- Full detail kit that reproduces even the engine\u003cbr\u003e- Japanese supplementary manual included\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853689086,"sku":"BEL015 BELKITS","price":77.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/d6c1bab2da3d781e.jpg?v=1772689368"},{"product_id":"belkits-bel014-1-24-i20-coupe-wrc-2019-tour-de-corse-winner-model-car","title":"BELKITS BEL014 1\/24 i20 Coupe WRC 2019 Tour de Corse Winner (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36 x 21 x 9 cm \/ 677g \u003cbr\u003e[About actual car]\u003cbr\u003e- The i20 Coupe WRC is a WRC machine developed by , a Korean car manufacturer.\u003cbr\u003e- Developed based on 's subcompact car, the second-generation i20 3-door coupe.\u003cbr\u003e- Debuted in WRC in 2017.\u003cbr\u003e-The machine is based in Germany and developed by Motorsport GmbH, which is in charge of 's global motorsports activities such as WRC and customer racing.\u003cbr\u003e- Equipped with a 1.6-liter in-line 4-cylinder direct-injection turbo engine that produces 380 horsepower, and combines front and rear MacPherson strut suspension with a four-wheel drive system.\u003cbr\u003e- Started participating in WRC from 2017. Continuing to improve, in 2019, he recorded four wins, including the Tour de Cosle, and won the first title for , the constructor champion.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e-A plastic model assembly kit that reproduces the 1\/24 scale i20 Coupe WRC released by Belkit, a Belgian model maker that vigorously develops rally car models.\u003cbr\u003e- The total length of the finished product is about 170mm, and the style of the powerful WRC works machine is realistically modeled.\u003cbr\u003e- Although it is an engineless kit, you can see the details of the champion machine while assembling, such as the mechanical reproduction of the chassis underside, suspension, etc., and especially the reproduction of the cockpit surrounded by the roll bar.\u003cbr\u003e-The body has a separate part for the overfender. It reproduces the expression sharply and three-dimensionally.\u003cbr\u003e- In addition, soft plastic material is used to reproduce the texture of the parts.\u003cbr\u003e- In addition, the kit also includes a set of photo-etched parts for improving details such as brake discs.\u003cbr\u003e- It is a complete kit.\u003cbr\u003e-This kit reproduces the markings of the machine driven by Thierry Neuville and winning the 2019 WRC Round 3 Tour de Corse.\u003cbr\u003e- Supplementary explanations in Japanese are also provided for easy assembly.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Completely new mold\u003cbr\u003e- 1\/24 scale reproduction of the 2019 i20 Coupe WRC\u003cbr\u003e- Modeled after the 2019 Tour de Corse winning car\u003cbr\u003e- Etching parts for detail improvement included\u003cbr\u003e- Realistic cockpit\u003cbr\u003e- The underside of the chassis is also mechanically reproduced, such as the suspension.\u003cbr\u003e- Markings are expressed with large decals\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e* This product will be delivered via Platts Co., Ltd.\u003cbr\u003e* Platts Co., Ltd. accepts after-sales service only for officially imported products purchased through our distribution. Please note that we do not accept parallel imports.\u003cbr\u003e*The image is under development. It may differ from the actual product.\u003cbr\u003e*Please note that prices, specifications, and release dates are subject to change without notice.\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853721854,"sku":"BEL014 BELKITS","price":90.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/517a16a60596be6e.jpg?v=1772689368"},{"product_id":"belkits-bel010-1-24-peugeot-207-s2000-2009-ypres-rally-winner-model-car","title":"BELKITS BEL010 1\/24 Peugeot 207 S2000 2009 Ypres Rally Winner (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 35.1 x 20.3 x 9.1 cm \/ 504g \u003cbr\u003eReproduce the one that won the traditional Monte Carlo\u003cbr\u003e- This is a 1\/24 scale plastic model assembly kit that reproduces the Polo R WRC that won the 2015 WRC opening round, the Monte Carlo Rally.\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e-The Polo R WRC is the S2000 rally car that German has introduced to the WRC since 2013.\u003cbr\u003e- The body with over fenders is expanded to 1820 mm, which is the full width of the regulations.\u003cbr\u003e- The engine was equipped with a 1.6-liter in-line 4-cylinder with turbocharger at the front.\u003cbr\u003e- Participated in the actual race from the first round of the 2013 WRC, the Monte Carlo Rally.\u003cbr\u003e- 13 races, 12 wins in the 2014 season to win the title.\u003cbr\u003e- In 2015, the design of the rear wing was changed, the gearbox was improved and the weight was reduced, further increasing the fighting power.\u003cbr\u003e- Participated in the WRC from the opening round of the Monte Carlo Rally, and recorded 12 wins out of 13 races, including the Monte Carlo Rally.\u003cbr\u003e- You won the championship two years in a row.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e-A 1\/24 scale Polo R WRC plastic model assembly kit released by Belkit, a Belgian model maker who is passionate about rally car model development.\u003cbr\u003e- The number of parts is 133, the finished length is 167mm, and the total width is 77mm.\u003cbr\u003e- Modeled on the 2015 WRC champion Polo's Monte Carlo Rally winning machine.\u003cbr\u003e- The body reproduces the front and rear over fenders in one piece.\u003cbr\u003e- Markings reproduced with large decals can be finished by selecting three drivers: Ogier, Latvala, and Mickelson.\u003cbr\u003e-Reproduces the differences from the 2013 specification, such as the 2015 specification rear wing and paddle shift steering.\u003cbr\u003e- Also modeled the lights for the night stage.\u003cbr\u003e- Chassis bottom surface is mechanically reproduced such as suspension and 4WD drive shaft.\u003cbr\u003e-Furthermore, the cockpit features rally equipment such as a fire extinguisher, a unique shift lever, roll bar, and steering frame.\u003cbr\u003e-The kit also includes photo-etched parts such as seat belt materials and brake discs. It is a complete kit.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Reproduce Polo R WRC in 1\/24 scale\u003cbr\u003e- Modeled after the 2015 Monte Carlo Rally car\u003cbr\u003e- Etching parts for detail improvement included\u003cbr\u003e- Realistic cockpit\u003cbr\u003e- The underside of the chassis is also mechanically reproduced, such as the suspension.\u003cbr\u003e- Markings are expressed with large decals\u003cbr\u003e- Includes masking sheet for window frame painting\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853754622,"sku":"BEL010 BELKITS","price":77.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/aea88d94b0ef7c58.jpg?v=1772689369"},{"product_id":"belkits-bel009-1-24-manta-400-gr-b-1984-ypres-rally-24h-model-car","title":"BELKITS BEL009 1\/24 Manta 400 Gr.B 1984 Ypres Rally 24h (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 36.2 x 21.2 x 9.2 cm \/ 520g \u003cbr\u003eOne that you can't miss the powerful body of Group B\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e- The Manta 400 appeared in 1981 as the successor to the Ascona 400 introduced in the WRC.\u003cbr\u003e- Developed based on Manta B.\u003cbr\u003e- Equipped with a 2410cc in-line 4-cylinder DOHC 16-valve naturally aspirated engine tuned by Cosworth of England, famous in the racing world.\u003cbr\u003e- It adopted the FR system that drives the rear wheels.\u003cbr\u003e- The body uses a lot of aluminum and carbon, and has achieved a weight reduction of less than 1000kg.\u003cbr\u003e- In addition, the German tuner Irmscher is in charge of tuning the suspension.\u003cbr\u003e-From 1983 to 1986, when Group B homologation was acquired, he was active in the World Rally Championship, European Championship, and national championships in each country.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e- This is a 1\/24 scale plastic model assembly kit of the Manta 400Gr.\u003cbr\u003e- Manufactured by Belkit, a Belgian company that actively develops old and new rally cars.\u003cbr\u003e- In addition to the basic plastic parts, the set includes etching detail up parts, seat belt materials, and masking sheets that are convenient for painting window frames.\u003cbr\u003e-The body reproduces the wide over fender, rear spoiler, bonnet air scoop and slits unique to Group B machines.\u003cbr\u003e-The cockpit is modeled with separate parts such as rally equipment meters on the dashboard, footrests on the floor, tools such as fire extinguishers and wrenches.\u003cbr\u003e- In addition, you can choose between right-hand drive and left-hand drive specifications.\u003cbr\u003e- Marking is car number 1, Jimmy, who finished 4th in the Ypres 24 Hours Rally, a rally held in Belgium from June 29th to July 1st, 1984 as one of the 1984 European Rally Championship series. Reproduce McRae's machine.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- 1\/24 scale reproduction of the 1984 Manta 400Gr.B\u003cbr\u003e-Etching parts for detail improvement and seat belts are also included.\u003cbr\u003e- Decals are made by high quality Italian Cartograf\u003cbr\u003e- Finished total length 168mm, total width 77mm\u003cbr\u003e- 144 parts\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e\u003cbr\u003e( This is a machine translation. Please allow for possible misinterpretations in the text. )\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853787390,"sku":"BEL009 BELKITS","price":77.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/9ba84375f8fc880f.jpg?v=1772689370"},{"product_id":"belkits-bel007-1-24-escort-rs1600-mk-i-1972-rac-rally-winner-model-car","title":"BELKITS BEL007 1\/24 Escort RS1600 MK.I 1972 RAC Rally Winner (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 35 x 20 x 9 cm \/ 510g \u003cbr\u003eTaste the first RAC rally victory by a British in 1\/24 scale\u003cbr\u003e- 1\/24 scale plastic model assembly kit of the Escort RS1600MK.I. This kit includes Japanese assembly supplementary instructions.\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e- The Escort was born in 1967 as a small popular car developed by in the UK.\u003cbr\u003e- A 4-cylinder engine is installed vertically at the front, and a general FR system that drives the rear tires is adopted.\u003cbr\u003e- Suspension also adopted a rigid axle leaf spring for the rear wheel.\u003cbr\u003e- The first model, the Mk.I, was produced until 1974 and was succeeded by the Mk.II.\u003cbr\u003e-Escort, which gained popularity as a small mass-market car, has a simple mechanism configuration and is also active as a base vehicle in various categories of motor sports.\u003cbr\u003e- A high-performance sporty model was added, and the RS1600 equipped with Cosworth's BDA1600cc twin cam won many victories in the rally field from the end of the 1960s to the 1970s.\u003cbr\u003e- Among them, in the RAC rally held in England, Roger Clark drove in 1972 and won the local rally for the first time as an Englishman. It was a hot topic.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e- This is a 1\/24 scale plastic model assembly kit that reproduces one of the famous rally cars, the Escort Mk.I.\u003cbr\u003e- Manufactured by Belkit in Belgium who are actively developing old and new rally cars.\u003cbr\u003e- This kit is modeled after the 1972 Daily Mirror RAC Rally specification won by Roger Clark at the steering wheel.\u003cbr\u003e- Finished length is 168mm, width 77mm, 144 parts.\u003cbr\u003e- The body, which is reproduced with the over fenders, has a distinctive style.\u003cbr\u003e-The front and rear bumpers and grills are made of plated parts, giving you a taste of the 70's machine.\u003cbr\u003e-The underside of the chassis has a three-dimensional finish with separate parts such as the lower part of the engine and the exhaust pipe.\u003cbr\u003e- The leaf spring of the rear suspension is also well modeled.\u003cbr\u003e- The interior is reproduced in detail, including the dashboard, seats, and roll bars.\u003cbr\u003e- Etching and belt material are prepared for the seat belt to produce a realistic finish.\u003cbr\u003e- Marking is Cartograf decal.\u003cbr\u003e- In addition, photo-etched parts such as brake discs and soft plastic parts for mud flaps are also included.\u003cbr\u003e- Please enjoy the famous car of the past with Belkit.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- 1\/24 scale reproduction of the 1972 RAC rally winning escort\u003cbr\u003e-Etching parts for detail improvement and seat belt materials are also included.\u003cbr\u003e- Also modeled the lights for the night stage\u003cbr\u003e- Optional parts for right-hand drive specifications are also available\u003cbr\u003e- Decals are made by Cartograf\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e*The image is under development. It may differ from the actual product.\u003cbr\u003e*Please note that prices and release dates are subject to change without notice.\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853820158,"sku":"BEL007 BELKITS","price":77.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/74aee5e23026173b.jpg?v=1772689370"},{"product_id":"belkits-bel006-1-24-escort-rs1600-mk-i-1973-rac-rally-winner-model-car","title":"BELKITS BEL006 1\/24 Escort RS1600 MK.I 1973 RAC Rally Winner (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 35 x 20 x 9 cm \/ 513g \u003cbr\u003eTaste the famous rally car in 1\/24 scale\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e- The Escort was born in 1967 as a small popular car developed by in the UK.\u003cbr\u003e- A 4-cylinder engine is installed vertically at the front, and a general FR system that drives the rear tires is adopted.\u003cbr\u003e- Suspension also adopted a rigid axle leaf spring for the rear wheel.\u003cbr\u003e- The first model, the Mk.I, was produced until 1974 and was succeeded by the Mk.II.\u003cbr\u003e-Escort, which gained popularity as a small mass-market car, has a simple mechanism configuration and is also active as a base vehicle in various categories of motor sports.\u003cbr\u003e- A high-performance sporty model was added, and the RS1600 equipped with Cosworth's BDA1600cc twin cam won many victories in the rally field from the end of the 1960s to the 1970s.\u003cbr\u003e- Among them, Timo Mäkinen was active in the RAC Rally held in England, winning three consecutive victories from 1973 to 1975.\u003cbr\u003e- It became a masterpiece car that carved its name in the motor sports scene.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e- This is a 1\/24 scale plastic model assembly kit that reproduces one of the famous rally cars, the Escort Mk.I.\u003cbr\u003e- Manufactured by Belkit in Belgium who are actively developing old and new rally cars.\u003cbr\u003e- This kit is modeled after the 1973 Daily Mirror RAC Rally, driven by Timo Mäkinen.\u003cbr\u003e- Finished length is 168mm, width 77mm, 144 parts.\u003cbr\u003e- The body, which is reproduced with the over fenders, has a distinctive style.\u003cbr\u003e-The front and rear bumpers and grills are made of plated parts, giving you a taste of the 70's machine.\u003cbr\u003e-The underside of the chassis has a three-dimensional finish with separate parts such as the lower part of the engine and the exhaust pipe.\u003cbr\u003e- The leaf spring of the rear suspension is also well modeled.\u003cbr\u003e- The interior is reproduced in detail, including the dashboard, seats, and roll bars.\u003cbr\u003e- Etching and belt material are prepared for the seat belt to produce a realistic finish.\u003cbr\u003e- Marking is Cartograf decal.\u003cbr\u003e- In addition, photo-etched parts such as brake discs and soft plastic parts for mud flaps are also included.\u003cbr\u003e- Please enjoy the famous car of the past with Belkit.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- 1\/24 scale reproduction of the 1973 RAC rally winning escort\u003cbr\u003e-Etching parts for detail improvement and seat belt materials are also included.\u003cbr\u003e- Also modeled the lights for the night stage\u003cbr\u003e- Optional parts for right-hand drive specifications are also available\u003cbr\u003e- Decals are made by Cartograf\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e*The image is under development. It may differ from the actual product.\u003cbr\u003e*Please note that prices and release dates are subject to change without notice.\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853852926,"sku":"BEL006 BELKITS","price":77.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/b414db5eb6bef847.jpg?v=1772689371"},{"product_id":"belkits-bel004-1-24-s2000-evo-2012-barum-czech-rally-zlin-winner-model-car","title":"BELKITS BEL004 1\/24 S2000 EVO 2012 Barum Czech Rally Zlin Winner Model Car Kit","description":"\u003ch2\u003eBELKITS BEL004 1\/24 S2000 EVO 2012 Barum Czech Rally Zlin Winner Model Car Kit\u003c\/h2\u003e\n\n\u003cp\u003eItem Size\/Weight : 35.3 x 20 x 10.1 cm \/ 480g \u003cbr\u003e[About actual car]\u003cbr\u003e- The Škoda Fabia S2000 is a rally car launched in 2009 by Skoda, a Czech automaker with a long history.\u003cbr\u003e- Based on the second generation Fabia that appeared in 2007, it was developed according to the Super 2000 regulations.\u003cbr\u003e- Rally series with S2000 machines launched in 2006, Intercontinental Rally Challenge, IRC. In the 2010 season, we developed an evolution model with a wider overall width in line with the regulation change.\u003cbr\u003e- The engine is equipped with an in-line 4-cylinder 1998cc that produces 265 horsepower and is equipped with a four-wheel drive mechanism.\u003cbr\u003e- From 2010 to 2012, it won the double title of driver's champion and manufacturer's champion for three consecutive years.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e-A 1\/24 scale S2000EVO plastic model assembly kit released by Belkit, a Belgian model maker who is passionate about rally car model development.\u003cbr\u003e- Finished length is 168mm and width is 77mm.\u003cbr\u003e- Modeled on the tarmac rally specification that won the 2012 Balm Czech Rally Zlín.\u003cbr\u003e- The body reproduces the front and rear over fenders in one piece.\u003cbr\u003e- Markings reproduced with large decals are expressed in metallic colors with green lines.\u003cbr\u003e- Chassis bottom surface is mechanically reproduced such as suspension and 4WD drive shaft.\u003cbr\u003e-In addition, the cockpit also models rally equipment such as a fire extinguisher and a wrench installed in preparation for tire changes.\u003cbr\u003e- Also, you can't miss the detailed reproduction of the roll bar and steering support frame.\u003cbr\u003e-The kit also includes photo-etched parts such as seat belt materials and seat frames.\u003cbr\u003e- It is a complete kit.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Reproduce Skoda S2000 in 1\/24 scale\u003cbr\u003e- Modeled after the 2012 Balm Czech Rally Zlín winner\u003cbr\u003e- Etching parts for detail improvement included\u003cbr\u003e- Realistic cockpit\u003cbr\u003e- The underside of the chassis is also mechanically reproduced, such as the suspension.\u003cbr\u003e- Markings are expressed with large decals\u003cbr\u003e- Includes masking seal for window frame painting\u003cbr\u003e- Japanese supplementary manual included\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853885694,"sku":"BEL004 BELKITS","price":71.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/O1CN01BdtSZk22j2xZEG8Dq__20347155_jpg_q50_jpg.webp?v=1776923413"},{"product_id":"belkits-bel003-1-24-fiesta-wrc-2011-assembly-model-kit-high-detail-collectible","title":"BELKITS BEL003 1\/24 Fiesta Wrc 2011 Assembly Model Kit High Detail Collectible","description":"\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/02\/09\/1dl9mheaq781vl98\/6004d2cb4f36bb42.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/02\/09\/1dl9mheaq781vl98\/a023b015bc7620b5.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/02\/09\/1dl9mheaq781vl98\/4c9c44b7309a05cf.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/02\/09\/1dl9mheaq781vl98\/249b30b1051ab61c.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/02\/09\/1dl9mheaq781vl98\/62f0c1a4d76c9d3b.jpg\"\u003e\n\u003c\/div\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853918462,"sku":"BEL003 BELKITS","price":71.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/09af53ad2c958f60.jpg?v=1772689373"},{"product_id":"belkits-bel002-1-24-fiesta-s200-2010-rally-monte-carlo-winner-model-car","title":"BELKITS BEL002 1\/24 Fiesta S200 2010 Rally Monte Carlo Winner (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 35 x 20 x 10 cm \/ 484g \u003cbr\u003eIn 2010, the fiesta that ran through Monte Carlo, appeared in Belkit\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e- The Fiesta S2000 is the Super 2000 machine that , who has been active in the world rally for many years, debuted in the 2010 Monte Carlo Rally.\u003cbr\u003e- Developed in collaboration with and M-Sport.\u003cbr\u003e- It is a machine that makes use of the know-how of the Focus RS WRC, which has achieved many successes.\u003cbr\u003e- The base vehicle is the 4th generation Fiesta released in 2008.\u003cbr\u003e-The machine was modified to comply with the S2000 regulations, and mounted an in-line 4-cylinder 1998cc engine on a dynamic body with over fenders on the front and rear.\u003cbr\u003e- Suspension is front and rear MacPherson struts and drive is 4WD.\u003cbr\u003e- Debuted in the 2010 Monte Carlo Rally and won, driven by Mikko Hirvonen.\u003cbr\u003e- You gave momentum to your success after your debut win.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e-A 1\/24 scale Fiesta S2000 plastic model assembly kit released by Belkit, a Belgian model maker passionate about rally car model development.\u003cbr\u003e- The number of parts is 125, the finished length is 168mm, and the total width is 77mm.\u003cbr\u003e- Modeled on the tarmac rally specification that won the 2010 Monte Carlo Rally in its debut race.\u003cbr\u003e- The body reproduces the front fender with some parts.\u003cbr\u003e- Sharply reproduces the powerful body design.\u003cbr\u003e- Markings are prepared with decals even on blue lines.\u003cbr\u003e- Chassis bottom surface is mechanically reproduced such as suspension and 4WD drive shaft.\u003cbr\u003e-Furthermore, the cockpit also models rally equipment such as a fire extinguisher.\u003cbr\u003e- Also, you can't miss the detailed reproduction of the roll bar.\u003cbr\u003e-The kit includes materials for seat belts, photo-etched parts for improving details, and a mask sheet for painting window frames.\u003cbr\u003e- It is a complete kit.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Reproduce the Fiesta S2000 in 1\/24 scale\u003cbr\u003e- Modeled after the 2010 Monte Carlo Rally winner\u003cbr\u003e- Etching parts for detail improvement included\u003cbr\u003e- Realistic cockpit\u003cbr\u003e- The underside of the chassis is also mechanically reproduced, such as the suspension.\u003cbr\u003e- Markings are expressed with decals\u003cbr\u003e- Includes masking seal for window frame painting\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e( This is a machine translation. Please allow for possible misinterpretations in the text. )\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853951230,"sku":"BEL002 BELKITS","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/a127ea02450c3ad9.jpg?v=1772689375"},{"product_id":"belkits-bel001-1-24-peugeot-207-s2000-2009-ypres-rally-winner-model-car","title":"BELKITS BEL001 1\/24 Peugeot 207 S2000 2009 Ypres Rally Winner (Model Car)","description":"\u003cp\u003eItem Size\/Weight : 35.2 x 20.2 x 7.4 cm \/ 405g \u003cbr\u003eA plastic model assembly kit that reproduces the Peugeot 207 that won the 2009 Belgian Ypres Rally on a 1\/24 scale that makes the champion of the Intercontinental Rally.\u003cbr\u003e- Japanese supplementary manual included\u003cbr\u003e\u003cbr\u003e[About actual car]\u003cbr\u003e-The Peugeot 207 S2000 is a rally car developed in 2007 by Peugeot, which has a long history of success in motor sports such as rallies.\u003cbr\u003e- Built to meet the newly set FIA Super 2000 regulations.\u003cbr\u003e- Based on Peugeot's compact hatchback 207, the engine is equipped with an in-line 4-cylinder 1998cc.\u003cbr\u003e- Generated 280 horsepower with natural aspiration.\u003cbr\u003e- Four-wheel drive is adopted for driving.\u003cbr\u003e- The machine that was finished by making use of the know-how cultivated in WRC participation demonstrates high fighting power.\u003cbr\u003e- Participated in the Intercontinental Rally Championship and IRC from 2007 and won the championship for three consecutive years from 2007 to 2009.\u003cbr\u003e- 2009 driven by British driver Chris Meeke.\u003cbr\u003e- The machine driven by Chris Meeke won the Ypres Rally in Belgium from June 18th to 20th as part of the IRC.\u003cbr\u003e- You have demonstrated your ability.\u003cbr\u003e\u003cbr\u003e[About the model]\u003cbr\u003e-A 1\/24 scale Peugeot 207S2000 plastic model assembly kit released by Belkit, a Belgian model maker who is passionate about rally car model development.\u003cbr\u003e-The number of parts is 95, the finished length is 168mm, and the total width is 75mm.\u003cbr\u003e- Modeled after the 2009 Ypres Rally winning machine.\u003cbr\u003e- The body reproduces the front and rear over fenders in one piece.\u003cbr\u003e- The markings designed with the British flag decorating the body are reproduced with large decals.\u003cbr\u003e- Chassis bottom surface is mechanically reproduced such as suspension and 4WD drive shaft.\u003cbr\u003e-In addition, the cockpit also models fire extinguishers, rally equipment, footrests, helmet holders, and spare tires.\u003cbr\u003e- Also, you can't miss the detailed reproduction of the roll bar.\u003cbr\u003e- In addition, the kit also includes photo-etched parts such as seat belt materials and seat belt metal fittings.\u003cbr\u003e- It is a complete kit.\u003cbr\u003e\u003cbr\u003e[Major features]\u003cbr\u003e- Reproduce Peugeot 207S2000 in 1\/24 scale\u003cbr\u003e- Modeled after the 2009 Ypres Rally winner\u003cbr\u003e- Etching parts for detail improvement included\u003cbr\u003e- Realistic cockpit\u003cbr\u003e- The underside of the chassis is also mechanically reproduced, such as the suspension.\u003cbr\u003e- Markings are expressed with large decals\u003c\/p\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":47859853983998,"sku":"BEL001 BELKITS","price":70.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/4d94539a09dfce75.jpg?v=1772689375"},{"product_id":"belkits-bel026-1-24-gr-yaris-1-hybrid-wrc-2023-rally-me","title":"BELKITS BEL026 1\/24 GR Yaris 1 Hybrid WRC 2023 Rally Mexico Winner Model Car","description":"\u003cdiv\u003e\n\u003cdiv\u003eFinally!! The GR Yaris, a car you can't miss, is now available as a model\u003c\/div\u003e\n\u003cdiv\u003e[About the actual car]\u003cbr\u003eThe GR Yaris Rally 1 Hybrid is a top-category machine developed by Toyota, which competes in the World Rally Championship (WRC), in accordance with the new 2022 regulations.\u003cbr\u003eThe 1.6-liter direct-injection turbo engine is combined with a hybrid unit consisting of a 3.9kw\/h battery and a motor-generator unit, allowing it to produce a maximum output of over 500PS during acceleration.\u003cbr\u003eThe gearbox is a 5-speed with mechanical shifting.\u003cbr\u003eFour-wheel drive with front and rear mechanical differentials.\u003cbr\u003eThe chassis is a space frame structure that complies with regulations.\u003cbr\u003eThe front and rear suspensions use MacPherson struts.\u003cbr\u003eThe 2023 model has improved cooling efficiency and aerodynamic performance through changes to the air duct lines on the body sides.\u003cbr\u003eHe performed well, winning the first race of the season, the Rallye Monte Carlo, and the third race, the Rallye Mexico, which was the first gravel rally.\u003cbr\u003eDriver Kalle Rovanperä won the championship, and won the constructors' championship.\u003c\/div\u003e\n\u003cdiv\u003e[About the model]\u003cbr\u003eThis is a 1\/24 scale plastic model assembly kit that recreates the GR Yaris Rally 1 Hybrid, Toyota's rally car that Japanese motorsport fans cannot miss.\u003cbr\u003eThe finished length is approximately 176mm and is modeled after the GR Yaris Rally1 Hybrid that won the 2023 Rally Mexico.\u003cbr\u003e- Not only is the underside of the chassis detailed, but the front also includes parts for the underside of the engine.In addition, the front and rear suspensions are also modeled, giving it a mechanical finish.\u003cbr\u003e- The suspension faithfully replicates the gravel specifications used in Rally Mexico.\u003cbr\u003e-The cockpit is reproduced in detail, including the shape and details of the roll cage, as well as the ABC pedals, steering column, steering wheel, etc.\u003cbr\u003e- Details of modern rally cars are of interest.\u003cbr\u003e- The body is modeled with a lot of impact, including the large rear wing and overfender shape.\u003cbr\u003e- Masking sheets are also included for convenient painting of window frames.\u003cbr\u003e- In addition to the winning car number 17 of Ogier, markings also include 33, 69, and Katsuta's 18.\u003c\/div\u003e\n\u003cdiv\u003e[Major features]\u003cbr\u003e?Completely new mold\u003cbr\u003e?Reproduce the 2023 GR Yaris Rally 1 Hybrid in 1\/24 scale\u003cbr\u003e- Modeled after the 2023 Rally Mexico winning car\u003cbr\u003e- Includes etching parts for detailing\u003cbr\u003e- Realistically reproduced cockpit\u003cbr\u003e- The underside of the chassis is also mechanically reproduced, including the suspension.\u003cbr\u003e- The headset used by the driver is also modeled\u003cbr\u003e- Markings are expressed with large decals\u003cbr\u003eIn addition to the winning car number 17 driven by Ogier, there are four other car numbers available: 33, 69, and Katsuta's 18.\u003c\/div\u003e\n\u003cdiv\u003e*Please note that release dates, prices, product names, etc. may change without notice.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/b28eaa160e2ddadc.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/d98b18ca497467f9.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/5546872c66c8857e.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/dfab431ae3ba0ebb.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/3b54d0530c4a2ec0.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/f119a52bab9c1a85.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/8d69ad1158423b04.jpg\"\u003e\u003cimg style=\"max-width: 100%;\" src=\"https:\/\/pg-cdn-a2.datacaciques.com\/00\/MTExNDY1\/26\/04\/09\/04697tnu321442yw\/f0abbb23e395fb86.jpg\"\u003e\n\u003c\/div\u003e","brand":"BELKITS","offers":[{"title":"Default Title","offer_id":48286853464318,"sku":"BEL026 BELKITS","price":102.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4628\/4542\/files\/8818fdaa835dae11.jpg?v=1780027512"}],"url":"https:\/\/modelhives.com\/collections\/belkits.oembed","provider":"ModelHives","version":"1.0","type":"link"}